1. Battery Powered Baja Light
Installation: First, connect all the wires together. Open the battery compartment and insert new batteries. Next, open your front plate by cutting the two zip ties on one side. Take the double-sided tape included with your order and stick it onto the battery. Then, stick the battery behind the front plate. Make sure the battery cover faces outward toward you so you can easily open it to replace the batteries later. Attach the light switch to your handlebars and tighten it securely. Next, put the Baja light mount on and zip tie the Baja around your handlebars securely. Once everything is installed, test the light to make sure it works properly.
If you need to see the installation visually, here's the link:
2. Battery Powered Horn
Installation: First, connect all the wires together. Open the battery compartment and insert new batteries. Next, open your front plate by cutting the two zip ties on one side. Take the double-sided tape included with your order and stick it onto the battery. Then, stick the battery behind the front plate. Make sure the battery cover faces outward toward you so you can easily open it to replace the batteries later. Next, attach the horn button to your handlebars and tighten it securely. Place the horn wherever you want on your bike and secure it in place. Once everything is installed, test the horn to make sure it works properly.
If you need to see it visually, here's the link:
3. Cable Management (10 Feet)
Installation: Identify any loose cables on your bike and arrange them neatly along the frame. Cut the cable management material to the required length, wrap or secure it around the cables as appropriate, and make sure the wiring stays clear of moving parts, sharp edges, and hot components.
If you need to see it visually, here's the link:
4. EVMods Merch
Installation: No installation is required. Choose your preferred color and size, and your EVMods shirt is ready to wear.
If you need to see it visually, here's the link:
5. Glossy Motocutz Style Front Plate
Installation: First, remove your old front plate by cutting all four zip ties, two on each side. Next, put the new front plate on and secure it with zip ties. Make sure to zip tie the plate to the suspension at all four corners. Once all four corners are securely fastened, the installation is complete.
If you need to see it visually, here's the link:
6. Item Holder Bag
Installation: Find a suitable mounting location on your bike's frame or another compatible attachment point. Position the bag so it does not interfere with your steering or moving components, fasten its straps or mounting hardware securely, and check that the bag stays in place before riding.
If you need to see it visually, here's the link:
7. Phone Holder For Seat
Installation: First, unscrew the bolts holding your seat in place. These bolts are usually located underneath the seat. Take the phone holder and slide it through the seat until it reaches the desired length and position. Once it is positioned correctly, put your seat back on and securely tighten all of the bolts. You can now securely place your phone underneath the holder, and it will hold your phone in place while you ride.
If you need to see it visually, here's the link:
8. Plug-in Play Baja Light For Super73
Installation: First, put the accessories onto the Baja light. Turn off your bike and unplug the stock light that is already connected to your bike. Next, connect the Baja light connector to the bike's connector, while making sure the arrows on both connectors are facing each other. Once they are connected, place the Baja light onto the front square mounting area. Secure the Baja light by zip tying it around the Baja and the handlebars on both the left and right sides. Once everything is secured, turn on your bike and test the light by holding the up arrow on your Super73 display to make sure it works properly.
If you need to see it visually, here's the link:
9. Plug-in Play Surron Throttle For Macfox
Installation: Turn off your bike and unplug the throttle from the bike. Next, remove your old throttle by unscrewing the bolt that holds it in place. Slightly loosen the two bolts on the Surron throttle, then slide it onto your handlebars. Tighten the two bolts to securely hold the throttle in place. Connect the throttle connectors together, while making sure the arrows on the connectors are facing each other. Turn on your bike and twist the throttle to make sure it works properly.
If you need to see it visually, here's the link:
10. Plug-in Play Surron Throttle for Super73
Installation: Turn off your bike and unplug the throttle from the bike. Next, remove your old throttle by unscrewing the bolt that holds it in place. Slightly loosen the two bolts on the Surron throttle, then slide it onto your handlebars. Tighten the two bolts to securely hold the throttle in place. Connect the throttle connectors together, while making sure the arrows on the connectors are facing each other. Turn on your bike and twist the throttle to make sure it works properly.
If you need to see it visually, here's the link:
11. Upgraded Grips For Any E-Bike / E-Moto
Installation: First, remove your old handlebar grips and clean the handlebars. One grip is made for the Surron throttle, so you will need a Surron throttle to install it. You can tell which grip is which by how soft they are. The softer grip is for the throttle, while the harder grip is for the handlebar. Slide each grip onto the correct side and push them fully into place. Make sure both grips are secure and your grips are installed.
If you need to see it visually, here's the link:
12. Surron Peg Adapter For Almost Any E-bike (Read Description)
Installation: If you already have pegs installed, remove your old pegs by unscrewing the bolt on the back of the peg. Next, insert the adapter's threaded section into the mounting hole. Add 5–8 washers, depending on your bike, to make sure the adapter fits correctly and tightly. Then, screw on the included nut from the back and tighten it securely. Once everything is tightened and secure, it's installed.
If you need to see it visually, here's the link:
13. Upgraded Pegs
Installation: First, attach the spring by placing one end of the spring into the small hole in the corner of your peg adapter or Surron peg holder on your e-moto. Next, place your upgraded pegs into position and slide the large peg pin through the upgraded pegs and the spring, making sure everything lines up properly. Once the peg pin is fully pushed through, place the C-shaped retaining clip onto the groove at the end of the peg pin to keep it from sliding back out. Make sure the retaining clip is fully seated and everything is securely in place before riding.
If you need to see it visually, here's the link:
14. Upgraded Front Fender
Installation: First, locate the mounting areas for your front fender. Position the upgraded fender in place and align its mounting holes with the mounting points. While holding the fender in position, insert and tighten the bolts through the mounting holes. Make sure all the bolts are securely tightened, and your upgraded front fender is installed.
If you need to see it visually, here's the link:
15. Ultra Bee Brake Clickers (Compatible With Most Mini E Motos)
Installation: First, unscrew the brake sensor located underneath your brake lever on the handlebars. Next, position the Ultra Bee brake clicker underneath the brake lever, making sure it is lined up correctly. Screw the brake sensor back into place to secure the clicker. Finally, squeeze the brake lever to check that you can hear the click.
If you need to see it visually, here's the link:
16. Dual Caliper Brake Mount
Installation: First, remove the two screws holding your existing brake caliper in place, then remove the old mount. Next, install your Dual Brake Caliper Mount and secure it properly with the new bolts. Finally, attach both brake calipers to the new mount, making sure they are positioned correctly and all screws are tightened securely. Before riding, check that both brakes work properly.
If you need to see it visually, here's the link:
17. Foldable E-Bike shift Lock
Installation: First, unscrew the bolt that goes through the circular clamp and the peg. Put the circular clamp onto your e-bike in the correct position, making sure it is facing outward. Next, take the foldable peg and position it so the bolt holes line up correctly and the bolt can go through the clamp and into the foldable peg. Once everything is lined up, put the bolt back through and tighten the circular clamp securely. Once tightened, your Foldable E-Bike Shift Lock is installed and ready to use.
If you need to see it visually, here's the link:
18. Passenger Pegs
Installation:
Installation: First, if you already have pegs installed, remove them by unscrewing the bolt behind the peg. Next, line up the threaded hole at the end of the Passenger Peg with the hole in your bike’s frame. Place the washers onto the bolt, then insert the bolt through the back of the frame through the washers and screw it into the Passenger Peg. Tighten the bolt securely, and your Passenger Pegs are installed.
If you need to see it visually, here's the link: